Roundshot VR Drive - Page 43

23/05/2019Roundshot VR Drive Instruction Manual – Firmware Version 2.023 42
2.4 Navigation (continued)
x/y-
repeat
Click on “x/y-repeat” to repeat any image of the program by selecting its row +
position.
This displays the rows of the active program (ie the last program which was
executed. Select the relevant row (elevation):
After completion of a program it may be necessary to repeat individual images or resume a
program from a certain position. This is particularly relevant for gigapixel projects.
repeat position
elev. : 66
images : 30
elev. : 55
images : 30
rows / page 1
elev. : 66
pos. : 30
elev. : 55
pos : 30
elev. : 44
pos : 30
elev. : 33
pos : 30
elev. : 22
pos : 30
elev. : 11
Pos : 30
position repeat
[1…10] [0…0]
Select the relevant row
(elevation), for example:
elev. : 66
pos : 30
For this row, select the position to repeat.
Press “start”.
The VR Drive will now repeat the selected position
of the program.