Roundshot VR Drive - Page 71

23/05/2019Roundshot VR Drive Instruction Manual – Firmware Version 2.023 70
point
acceleration
50
pause
1
speed
30
point
-45/45°
images
0
edit
delete
X
°
0.0
[-999.9..999.9]
duration
30
[8..9999]
pause
1
[0.1...3600.0]
acceleration
50
[0.1..3600.0]
Click on “duration” to change the time duration of the video
sweep from the previous point to the current one.
Confirm with “OK”.
Click on “acceleration” to adjust the velocity at which the speed
is adjusted.
Select a low value for slow speed adjustment, a high value for
fast adjustment.
Confirm with “OK”.
Click on “pause” to set a pause (in seconds) at the point.
Confirm with “OK”.
One image every … degrees
5
[1..9999]
In “timelapse” mode the “image release mode” parameter
(seconds or position) sets the VR Drive to release one image every
few seconds or degrees.
Enter the number of seconds or degrees at which one image is to
be released.
Make sure that the camera has enough time to create the images.
Confirm with “OK”.
4.2 Editing in timelapse and video modes (continued)