EasyManua.ls Logo

Royal 580 - Flag Options (Continued); Flag 7:

Royal 580
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(Continued) FLAG OPTIONS
FLAG 7:
"PRG" + (7) + [RA/+%] + (1 2 3 4 5 6 7 8) + [AMT TEND/TOTAL]
NOTE: If you need to change the setting for any of the options selectable with this flag, you must type either "0" or
"1" for all 8 options in order to make the change(s) you require and to reconfirm the default settings for the remaining
options.
Selec t
Options
USE of RA, PO, VOID, MAXIMUM PLU SELECTION, -, -% and #/ST KEYS in "R" MODE,
SPLIT TENDERING and COMPULSORY TENDERING
1
0 = 500 maximum PLUs - allows periodic reports.
1 = 1000 maximum PLUs - does not allow periodic reports.
2
0 = Enable using [RA] [PO] keys in the "REG" (Register) position.
1 = Disable using [RA] [PO] keys in the "REG" (Register) position.
3
0 = Enable the [VOID] [CPN] [RET] keys used as minus departments in the "R" mode.
1 = Disable the [VOID] [CPN] [RET] keys used as minus departments in the "R" mode.
4
0 = Enable pressing just the [#/ST] key to open the cash drawer.
1 = Disable pressing just the [#/ST] key to open the cash drawer.
5
0 = Enable pressing the [#/ST] key immediately after entering numeric keys.
1 = Disable pressing the [#/ST] key immediately after entering numeric keys.
6
0 = Enable registering transactions which more than one media is received, for example,
cash and a check (split tendering).
1 = Disable registering transactions which more than one media is received, for example, cash
and a check (split tendering).
7
0 = Enable registering the amount received from a customer and the calculation of the
change.
1 = Disable registering the amount received from a customer and the calculation of the
change.
8
0 = Do not require the amount received from a customer to be registered (compulsory
tendering).
1 = Require the amount received from a customer to be registered.
54

Table of Contents

Related product manuals