Royal 580 - Flag Options (Continued); Flag 8:

FLAG OPTIONS (Continued)
FLAG 8:
"PRG" + (8) + [RA/+%] + (1 2 3 4 5 6 7 8) + [AMT TEND/TOTAL]
NOTE: If you need to change the setting for any of the options selectable with this flag, you must type either "0" or
"1" for all 8 options in order to make the change(s) you require and to reconfirm the default settings for the remaining
options.
Selec t
Options
SELECTING STUB RECEIPT and DUPLICATE RECEIPT PRINTING OPTIONS,
DEPARTMENT SHIFT, TRANSACTION NUMBER RESET, COMPULSORY CASH
DECLARATION and PRINT POSITION of DATE, TIME, COMMERCIAL MESSAGE, etc
1
0 = Enable issuing a stub receipt (printed total only).
1 = Disable issuing a stub receipt (printed total only).
2
0 = Not used.
3,4
00 = Return automatically to the "Department 1 to 20 entry mode" after each registration
of department item.
01 = Return automatically to the "Department 1 to 20 entry mode" when the transaction is
finalized.
10 = Stay in the "Department 21 to 40 entry mode" until the [DEPT/SHIFT] key is pressed
again to change back to the "Department 1 to 20 entry mode".
5
0 = Do not reset the transaction number (consecutive number) after issuing the "Z"
report.
1 = Reset the transaction number (consecutive number) after issuing the "Z" report.
6
0 = Cash declaration is not compulsory before a "Z1" reading.
1 = Cash declaration is compulsory before a "Z1" reading.
7
0 = Print a programmed Date, Time, Transaction # and Clerk Name at the end of the
receipt.
1 = Print a programmed Date, Time, Transaction # and Clerk Name on the header position of
the receipt.
8
0 = Print a programmed commercial message on the header position on the receipt.
1 = Print a programmed commercial message on the trailer position on the receipt.
55