Royal 580 - Flag Options (Continued); Flag 9:

(Continued) FLAG OPTIONS
FLAG 9:
"PRG" + (9) + [RA/+%] + (1 2 3 4 5 6 7 8) + [AMT TEND/TOTAL]
NOTE: If you need to change the setting for any of the options selectable with this flag, you must type either "0" or
"1" for all 8 options in order to make the change(s) you require and to reconfirm the default settings for the remaining
options.
Selec t
Options
TRAINING MODE OPTIONS, CLERK REPORT
and CLERK PASSWORD ENTRY
1
0 = Print the training information on the receipt/journal while in the operator training
mode.
1 = Do not print the training information on the receipt/journal while in the operator training
mode.
2
0 = Not used.
3
0 = Enable reports for training.
1 = Disable reports for training.
4
0 = Transaction Counter does not count up while in the Training Mode.
1 = Transaction Counter does count up while in the Training Mode.
5
0 = Not used.
6
0 = Do not require a manager password when issuing an individual clerk report.
1 = Require a manager password when issuing an individual clerk report.
7
0 = Do not reset the clerk password after each sales transaction is finished.
1 = Reset the clerk password after each sales transaction is finished.
8
0 = Do not reset the clerk password each time the position of the control lock is
changed.
1 = Reset the clerk password each time the position of the control lock is changed.
56