72
Managing the Access Point
Enabling Other Management Access Options
3. If you want to use TR-069 or SNMP to manage the AP, configure the settings listed
in Tab l e 22
.
HTTPS port This field lists the default HTTPS port of 443—only
if HTTPS has been activated. You can manually
change this port number if required.
Certification Verification This notes whether the security certificate linked
to the HTTPS settings has been passed or not.
Table 22. TR-069 and SNMP Management Options
Option Description
Auto Enables the ZoneFlex device to connect to either
SNMP server, Ruckus Wireless ZoneDirector, or
Ruckus Wireless FlexMaster.
SNMP only Only allow SNMP management
FlexMaster only Only allow FlexMaster management
DHCP Discovery URL of server providing DHCP
FlexMaster Server URL URL of the FlexMaster server
Digest-authentication
Username/Digest-
authentication password
This information is automatically generated by the
AP and used for authentication with FlexMaster.
Change this value only
if you want the AP to
connect to another access control server (ACS).
Contact FlexMaster every Interval at which the device should attempt to
contact FlexMaster
Table 21. Management Access Options
Option Description
To Next Page
Loading...
