RDC6432G control system user manual V1.1
SHENZHEN RUIDA TECHNOLOGY
Figure 8.5.11-2
If there is a problem with the U disk, it will prompt "Parameter backup failed".
Figure 8.5.11-3
8.5.13 Restore parameters from U disk
When the "red selection box" stops on the item, press [Enter] and enter the password. Please refer to
section 8.5.8 for the password input operation, the following interface will pop up:
Figure 8.5.11-4
If there is a problem with the U disk or the parameters are not backed up, it will prompt "parameter file
does not exist"
To Next Page
