Web-based Configuration Guide AP Management
112
Table 4-4 Traffic load balancing configuration
Enter the name of the AP load balancing group.
Select Traffic Load Balancing.
Configure a detailed load balancing rule, including the maximum traffic allowed
on an AP, the difference between the current traffic and the traffic on the AP with
the lightest load, and the number of attempts to the AP with full load.
By default, when the traffic load on an AP reaches 500 Kbit/s and the difference
between the current traffic and the traffic on the AP with the lightest load reaches
500 Kbit/s, clients can associate only to another AP in the group. After a client
association is denied by an AP for 10 times, the client will be allowed to
associate to the AP upon the next attempt.
Specify the APs to be added to the AP load balancing group.
To Next Page
Loading...
