Web-based Configuration Guide 1 Network Settings
82
Internet VLAN: If you need to set a VLAN ID for the Internet access service, turn on this parameter and enter the
VLAN ID. By default, the VLAN tag function is disabled. You are advised to keep the VLAN tag function disabled
unless otherwise specified.
After the configuration is completed, confirm that the IPTV set top box is connected to the correct port, for example,
LAN 3 in the example.
Caution
Enabling this function may lead to network disconnection. Exercise caution when performing this operation.
3.17.3 Configuration Steps (IGMP Type)
Choose Local Device > Basics > IPTV > IPTV/IGMP.
The IGMP type is applicable to the ISP FPT. After you enable IPTV connection, connect the IPTV set top box to
any LAN port on the router.
To Next Page
Loading...
Need help?
General
