Web-based Configuration Guide 1 Network Settings
65
(2) Click Add, enter the IP address and MAC address to be bound, and click OK. The input box can display
existing address mappings in the ARP list. You can click a mapping to automatically enter the address mapping.
To remove the binding between a static IP address and a MAC address, click Delete in the Action column.
3.11.3 Configuring ARP Guard
After ARP guard is enabled, only LAN hosts with IP-MAC binding can access the external network. For details on
how to configure ARP binding, see Section 3.10.2 Configuring ARP Binding.
(1) Choose Local Device > Security > ARP List.
(2) Turn on Enable in the ARP Guard section to enable ARP guard.
To Next Page
Loading...
