Web-based Configuration Guide AP Management
133
4.11 Configuring the LAN Port of Downlink Access Point
Caution
The configuration takes effect only for a downlink access point with a wired LAN port.
Choose Network > LAN Ports.
Enter the VLAN ID and click Save to configure the VLAN, to which the AP wired ports belong. If the VLAN ID is
null, the wired ports and WAN port belong to the same VLAN.
In self-organizing network mode, the AP wired port configuration applies to all APs having wired LAN ports on the
current network. The configuration applied to APs in LAN Port Settings takes effect preferentially. Click Add to
add the AP wired port configuration. For APs, to which no configuration is applied in LAN Port Settings, the
default configuration of the AP wired ports will take effect on them.
To Next Page
Loading...
Need help?
General
