Web-based Configuration Guide 1 Network Settings
84
Table 3-18 IP session limit rule information
Enter the name of the IP session limit rule.
Enter the start IP address for session matching in the rule.
Enter the end IP address for session matching in the rule.
Specify the maximum number of session connections for an IP address
matching the rule.
Specify whether the rule is effective. The rule takes effect after you turn on this
parameter.
3.20 Configuring Device Security
3.20.1 Configure Local Safety
1. Overview
Prohibit Ping: This function identifies and directly discards the ping packets in the traffic sent to the device,
so as to prohibit the ping operation on the device. Only admin IP addresses can ping through the device.
Admin IP Address: Admin IP addresses are exempt from the ping prohibition function. Packets sent from
admin IP addresses can pass through and will not be discarded.
Disable Intranet Access to Eweb: This function prohibits users from logging in to the device Eweb on a
client whose IP address is not a management IP address.