Web-based Configuration Guide System Management
2106
Configuration import: Click Browse, select a backup file on the local PC, and click Import to import the
configuration file. The device will restart.
10.8 Configuring LED Status Control
Choose Network > LED.
Turn on Enable and click Save to deliver the configuration.
10.9 Configuring Diagnostics
10.9.1 Network Check
When a network error occurs, perform Network Check to identify the fault and take the suggested action.
Choose Local Device > Diagnostics > Network Check.
Click Start to perform the network check and show the result.
To Next Page
Loading...
Need help?
General
