Web-based Configuration Guide AP Management
96
4 AP Management
Note
To manage the downlink AP, please enable self-organizing network discovery (See Section 3.1 Switching
the Work Mode for details.). The wireless settings are synchronized to all wireless devices in the network
by default. You can configure groups to limit the device scope under wireless management. For details,
see 4.1 AP Management.
The device does not emit the Wi-Fi signals. Deliver the wireless settings to the downlink AP to take effect.
4.1 Configuring AP Groups
4.1.1 Overview
After self-organizing network discovery is enabled, the device can function as the master AP/AC to batch
configure and manage its downlink APs by group. Before you configure the APs, divide them to different groups.
Note
If you specify groups when configuring the wireless network, the configuration takes effect on wireless devices
in the specified groups.
4.1.2 Configuration Steps
Choose Network > Devices > AP.
(1) View the information of all APs in the current network, including the basic information, RF information, and
model. Click the SN of an AP to configure the AP separately.
(2) Click Expand. Information of all the current groups is displayed to the left of the list. Click to create a
group. You can create a maximum of eight groups. Select the target group and click to modify the group
name or click to delete the group. You cannot modify the name of the default group or delete the default
group.
To Next Page
Loading...
Need help?
General
