Web-based Configuration Guide Switch Management
137
(2) In the networking topology, you can select the access switches on which you want to enable DHCP Snooping
in either recommended or custom mode. If you select the recommended mode, all switches in the network are
selected automatically. If you select the custom mode, you can manually select the desired switches. Click
Deliver Config. DHCP Snooping is enabled on the selected switches.
(3) After the configuration is delivered, if you want to modify the effective range of the DHCP Snooping function,
click Configure to select desired switches in the topology again. Turn off DHCP Snooping to disable DHCP
Snooping on all switches with one click.
To Next Page
Loading...
Need help?
General
