Web-based Configuration Guide 1 Network-Wide Monitoring
21
Applicable bands include 2.4 GHz, 5 GHz, and 2.4 GHz + 5 GHz.
Security types include Open, WPA-PSK, WPA2-PSK, and WPA_WPA2-PSK. When the security type is set
to WPA-PSK, WPA2-PSK, or WPA_WPA2-PSK, a Wi-Fi password is required.
Click Expand to configure the advanced parameters, including Hide SSID, Client Isolation, and Band Steering.
(3) Configure a VLAN for wireless access, specify the address pool server for access clients in this VLAN, and
determine whether to create a new DHCP address pool. By default, the gateway is used as the address pool
server to allocate addresses to access clients. If an access switch is available in this networking, you can
select this switch as the address pool server. After setting the service parameters, click Next.
(4) Confirm that the configuration items to be delivered are correct and then click Save. Wait a moment for the
configuration to take effect.
To Next Page
Loading...
Need help?
General
