Web-based Configuration Guide 1 Network Settings
50
Table 3-5 IPv6 address configuration for WAN port
Configure a method for the WAN port to obtain an IPv6 address.
DHCP: The current device functions as the DHCPv6 client, and it applies for
an IPv6 address and prefix from the uplink network device.
Static IP: You need to manually configure a static IPv6 address, gateway
address, and DNS server.
Null: The IPv6 function is disabled on the WAN port.
When Internet is set to DHCP, the automatically obtained IPv6 address is
displayed.
When Internet is set to Static IP, you need to configure this parameter manually.
When Internet is set to DHCP, the IPv6 address prefix automatically obtained by
the current device is displayed.
To Next Page
Loading...
Need help?
General
