Web-based Configuration Guide 1 Network Settings
68
Table 3-10 PPPoE server configuration
Specify whether to enable the PPPoE server function.
Specify whether LAN users must access the Internet through dialing.
Set the point-to-point address of the PPPoE server.
Specify the IP address range that can be allocated by the PPPoE server
to authenticated users.
Set the VLAN of the current PPPoE server.
Primary/Secondary DNS
Server
Specify the DNS server address delivered to authenticated users.
Unanswered LCP Packet Limit
When the number of LCP packets not answered in one link exceeds the
specified value, the PPPoE server automatically disconnects the link.
To Next Page
Loading...
