Installation Page 4-
Keyboard Port
A standard, off-the-shelf, PCAT type keyboard may be connected
to J2. A 6 pin circular mini-din female connector is provided
on the rear panel of the Model 2010D for this purpose.
Table 4-3 External Keyboard Port Connections
SIGNAL SIGNATURE 2010D J2
__________ _________________
J2-1 KEY DATA
J2-2 NO CONNECTION
J2-3 DIGITAL GROUND
J2-4 +5 VOLTS
J2-5 CLOCK
J2-6 NO CONNECTION
RS-232 Serial Communications Port 1
The cable should be equipped with a 9 pin female D connector on
one end and an appropriate connector on the other end.
The COM1 connector J3 on the rear panel of the Model 2010D is
a male type DB-9 connector.
Table 4-4 Communications Port 1 Connections
SIGNAL SIGNATURE 2010D J3
__________ _________________
J3-1 DATA CARRIER DETECT
J3-2 RECEIVE DATA
J3-3 TRANSMIT DATA
J3-4 DATA TERMINAL READY
J3-5 DIGITAL COMMON
J3-6 DATA SET READY
J3-7 REQUEST TO SEND
J3-8 CLEAR TO SEND
J3-9 RING INDICATOR
To Next Page
Loading...