System Operations Page 3-
ALT If the ALT key is pressed on the front
panel, an "ALT" indicator will be shown on
the status line. Pressing buttons on the
front panel while in ALT mode causes the
alternate key definitions (indicated to
the upper left of the key) to be selected.
OVR/INS To the far right of the status line the
"OVR" indicator is usually shown,
indicating that the unit is in overwrite
mode. Pressing the Ins button will change
this indicator to "INS" indicating that
insert mode has been selected.
The bottom line of the screen displays the functions associated with
the seven function keys, F1 through F7.
The remaining portion of the screen is used to display menus setup
screens and system status information.
A screen saver program will blank the screen if there is no user input
from the keypad/keyboard or serial communications ports. To bring
the screen back, press the sun button.
Main Menu Topics
The current Menu is broken up into seven main topics: Sequences,
Gases, System, Devices, Comm, Status and Diag. A brief description
of
each main menu item follows. Note the underlined letter in each
menu name, which represents the shortcut key that is available when
using an external keyboard.
To Next Page
Loading...
