Installation Page 4-15
The Ethernet / Internet Port
If the Network Interface Card is installed, the Model 2010D can
be connected to an Ethernet network. This allows the 2010D to
be remotely accessed or controlled via the Internet or an office
network. The Ethernet cable plugs into a standard RJ45 socket.
The IP address and port number are set up via the Comm menu.
The USB Device Port
Also included with the Network Interface Card is a USB Device
Port for connection to a PC or other host device that supports
USB. The Model 2010D’s USB port simulates a serial port and may
be accessed using standard serial terminal emulation software
using the ML Command or Modbus protocols
To Next Page
Loading...
