SAGEMCOM F@ST 2804v2 - Page 103

5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 5-67
• Click on the Next button to continue configuring the remote network (WAN) in MER mode.
Field Action Default
Enable NAT
Check the box to activate the NAT
function.
Checked
Enable Firewall
Check the box to activate the firewall
service.
Checked
Enable IGMP Multicast
Check the box to activate the IGMP
function.
Not checked
Enable WAN Service
Check the box to activate the WAN
service.
Checked
Service Name
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: mer_0_35_1.
Note: You may enter a different service
name.
mer_0_35_1