SAGEMCOM F@ST 2804v2 - 5.6 Internet Connection Setup

5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 5-9
5.6 Internet Connection
Object: This menu lets you enter your connection ID and your connection password.
• Select the Internet Connection heading to display the following connection configuration
screen:
Field Action Default:
PPP Username
Enter your connection ID.
This information is provided to you by your Internet Service
Provider (ISP).
Empty
PPP Password
Enter your connection password.
This information is provided to you by your Internet Service
Provider (ISP).
Empty
If the message "There is no ppp connection" appears, this means that the
remote network (WAN) parameters have not been filled in (see subsection 5.9.1 -
Advanced Setup / WAN).
Disconnect
When you click on the button “Disconnect”:
• Internet access is no longer possible.
• In the supervision box, indicator “Internet” passes from the green to the yellow and the text
“Connected” is replaced by “Waiting for ISP”.
• On the front panel, the indicator @ goes out.