SAGEMCOM F@ST 2804v2 - Security; IP Filtering

5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 5-83
5.9.3 Security
This menu contains 2 sub-menus:
• IP Filtering (see subsection 5.9.3.1),
• Block Sites (see subsection 5.9.3.2).
5.9.3.1 IP Filtering
5.9.3.1.1 Outgoing
Object: This menu is used to create outgoing IP filters to refuse data from the LAN to the WAN
and list the existing outgoing IP filters.
By default, all the outgoing data is accepted.
• Select the Outgoing sub-menu in the Security menu in the Advanced Setup section to
display the following screen:
Field Meaning
Filter Name
Name of the filter.
Protocol
Transport protocol.
Source Address / Mask
Source IP address / Subnet mask.
Source Port
Source port
Dest. Address / Mask
Destination IP address / Subnet mask.
Dest. Port
Destination port.