5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-110 Sagemcom document. Reproduction and disclosure prohibited
5.9.8 Port Mapping
Object: This menu is used to host a service (Video, Data, SIP) on an interface (ETH or Wi-Fi)
of your router.
• Select the Port Mapping menu in the Advanced Setup section to display the following
screen:
Field Meaning Default
Enable virtual ports on
If the box is not checked, the Ethernet 1 to 4
(ENET (1-4)) ports are gathered and seen like
only one virtual port.
When the box is checked, these ports are
independently seen but a fall of the
performances of the transfers between ports
is noted.
Box
not checked
To Next Page
Loading...
