SAGEMCOM F@ST 2804v2 - Connecting the Ethernet Interface of Your Router to Your TV Decoder

2 - Description and connection of your router
F@st™ 2804v2 Reference Manual - 2533329475-A
Page 2-10 Sagemcom document. Reproduction and disclosure prohibited
2.3.4 Connecting the Ethernet interface of your router to
your TV decoder
¾ Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the
Ethernet fixed connector (marked ETH1, ETH2, ETH3 or ETH4) of your router.
¾ Connect the other end of the cable to a TV decoder.
Note: For connection to the decoder, refer to the manufacturer's documentation.