SAGEMCOM F@ST 2804v2 User Manual

5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 5-89
5.9.4 Quality of Service
It is essential to check the box “Enable Quality Of Service” in the "WAN” menu of
the section “Advanced Setup” so that menu “Quality of Service” is diplayed.
This menu contains 2 sub-menus:
• Queue Config (see subsection 5.9.4.1),
• QoS Classification (see subsection 5.9.4.2).
Subject: This menu is used to allocated different types of traffic queues with different priorities
in order to improve the traffic flow. To do this, the quality of service (QoS) provides
the following three services: Classification (set-1, set-2), Marking (TOS, DSCP) and
queues (Queuing).
The quality of service is only significant if all the traffic (data, video) is greater than the
up rate of the ADSL line.
• Select the Quality of Service menu in the Advanced Setup section to display the following
screen:

SAGEMCOM F@ST 2804v2 Specifications

General

Brand	SAGEMCOM
Model	F@ST 2804v2
Category	Network Router
Language	English