5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 5-73
Field Action
VPI/VCI
Displays the VPI/VCI specific to the "Bridge" connection
Connection Type
Displays the "Bridge" protocol
Service Name
Displays the name of the service: br_0_35_1
Service Category
Displays the type of service adapted to the traffic required
IP Address
In the "Bridge" connection, this field is: Not Applicable
Service State
Displays the status of the service: Enabled
NAT
Displays the status of the NAT: Disabled
Firewall
Displays the status of the firewall: Disabled
IGMP Multicast
In the "Bridge" connection, this field is: Not Applicable
To Next Page
Loading...
