SAGEMCOM F@ST 2804v2 User Manual

5 - Information / Configuration
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-96 Sagemcom document. Reproduction and disclosure prohibited
Field Action
Traffic Class Name
Enter a name for the traffic class you want to create
Rule Order
Select from the scroll down list:
Blank :
Last :
Number : Number allotted by the system to the
existing rules.
Rule Status
Select from the scroll down list:
Blank :,
Disable : QoS disabled for this static class rule,
Enable : QoS enabled for this static class rule.
Assign Classification Queue
Select from the scroll down list:
Blank :
Number : Priority number and associated queue
number, defined by the system starting
from the “Queue Precedence”
(see subsection 5.9.4.1).
Assign Differentiated Services
Code Point (DSCP) Mark
Select the type of Differentiated Services Code
Point (DSCP) mark to be allocated
(6-bit coding) from the scroll down list.
Default to CS7 : 000000 to 111000
See the first table of this chapter.
Mark 802.1p if 802.1q is enabled
on WAN
Select Blank or a priority value between 0 and 7
from the scroll down list.
Note: The "Enable 802.1q" box is only present in
"Bridging" mode. This condition is
transparent for the other modes.

SAGEMCOM F@ST 2804v2 Specifications

General

Brand	SAGEMCOM
Model	F@ST 2804v2
Category	Network Router
Language	English