4 - Configuration of network parameters
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 4-3
1) Configuring as a DHCP client
In Windows XP
• click Start/Control Panel/Network Connections.
• right-click the appropriate network, and then select Properties; the
Local Area Connection Properties appears.
• select the protocol TCP/IP of the network card, and then click the Properties button; the
screen Internet Protocol (TCP/IP) Properties appears.
• select the general tab, then the case "Obtain an IP address automatically" and the case
"Obtain the addresses of the DNS servers automatically".
• click the OK button to confirm your choice.
To Next Page
