Via Pro User’s Guide – TouchChat 138
Updating the Device Software
When an iPad Pro software update is available, you can perform the update wirelessly or, if you cannot
update wirelessly, by using iTunes.
Updating Your iPad Pro Wirelessly
1. Connect to the Internet with Wi-Fi®.
2. Choose Settings > General > Software Update. The Software Update screen will be displayed.
3. Tap Download and Install.
Updating Your iPad Pro using iTunes
With the latest version of iTunes installed on your computer,
1. Connect the device to the computer.
2. Open iTunes and select your device.
3. Click Summary and then click Check for Update.
4. Click Download and Update.
Backing up and Restoring Device Files
Important! These procedures explain how to back up and restore device files only. They do not apply to
TouchChat vocabulary files.
Backing up the Device
1. Open iTunes on the computer.
2. Connect your device to the computer using a USB cable.
3. In iTunes, the device will appear on the left side.
4. Right-click on the device and choose Back Up.
5. iTunes will start to back up the device.
Restoring the Device
1. Open iTunes on the computer.
2. Connect your device to the computer using a USB cable.
3. In iTunes, the device will appear on the left side.
4. Right-click on the device and choose Restore from Backup.
5. iTunes will then prompt you to select the backup. Choose the one that is the most recent sync, to
ensure having the current versions.
6. iTunes will start restoring the device from the backup.
To Next Page