108 • Reports SAM4s SPS-2000 Operator Manual v1.18
Drawer Assignment
Note: This function available at software version 2.01n or later. At version 2.02b or later
drawer assignment is automatically downloaded to the IRC network.
With enhanced drawer assignment, cashiers can now be assigned to specific drawers at
specific registers. If REG#0 is selected the drawer assignment will be valid at all terminals.
1. Select the REP tab. (Password entry may be required)
2. Touch X MODE PGM and then touch DRAWER ASSIGNMENT. The RTC
SETTING (real time clock) screen displays.
3. Set the drawer assignment for each employee (the number is determined by memory
allocation – use the PREV. RECORD/NEXT RECORD key to view additional
employees.) After making settings, touch CLOSE.
FTP Transmission
Reserved for future use.
Receipt Reprint
Note: This feature is available at version 2.00t or later.
Receipt copies can be printed after the sale provided that the transaction data is resident in the
electronic journal. (You must allocate for electronic journal and set the appropriate electronic
journal system options.)
From the REP menu, touch Receipt Reprint. At the prompt enter the consecutive
number of the transaction you wish to reprint; touch OK. The transaction will be
retrieved from the electronic journal and printed at the designated receipt printer.
To Next Page
Loading...
