72 • Basic Operations SAM4s SPS-2000 Operator Manual v1.18
Soft Check Posting
It is not necessary to print the check at each posting. The PRINT CHECK key will print the
check at the designated printer. The PRINT CHECK key can be programmed to
automatically service the transaction.
Soft Check Tracking Program Notes:
Discuss these options with your authorized SPS-2000 dealer or refer to the SPS-2000
Program Reference Manual.
• You must set the check tracking method to “Soft”. See S Mode Memory Allocation
option #8.
• You must set the maximum number of lines per check. See S Mode Memory
Allocation option #11.
• You must set the maximum number of check for each tracking file. See S Mode
Memory Allocation option #12.
• You must set the register number that holds the check tracking file and backup file.
See S Mode System options #10 and #11.
• You must set the options for the Recall Check key. See P Mode Function Keys
#197-200. Options set here include:
Enforce Seat Number
Table Entry Required
Multiple Checks Allowed for each Table
Guest Count Entry Required
Compulsory for all Sales
(Check #) Assigned by Register
Opening Employee has Exclusive Access
Print Receipt after Store Check
Other related options
• Set P Mode System Options/Tracking File Options
Starting Check Numbers
Options to reset check numbers on Z of Financial or Open Check Reports
Option to print Barcodes on checks
Option to use Alpha Check Numbers
To Next Page
Loading...
