Sam4s SPS-2000 - Hard Check Posting

SAM4s SPS-2000 Operator Manual v1.18 Basic Operations • 71
Hard Check Posting
With "hard check" posting, only current balances are stored in memory.
Procedures and options relating to beginning, adding to and paying a check are the same on
"hard" and "soft" check posting, except it is necessary to print an update to the check at each
posting. Note that when a hard check is recalled, the previous balance is displayed. (In soft
check posting the previously registered items are recalled.)
Opening a Hard Check
Depending on the method used:
Enter check number, touch CHECK #, or
Enter table number, touch TABLE #.
Note that the previous balance is displayed.