36 • Basic Operations SAM4s SPS-2000 Operator Manual v1.18
Sign On by the Employee Key
When the register is signed off, the message line displays: SIGN ON REQUIRED.
1. Enter the employee number (use the operating code number of the sequential
employee number, depending upon the program).
2. Touch EMPLOYEE. The employee name displays in the message line.
Sign On by Push Button Key
If your system is using individual push button employee keys:
Touch the appropriate EMPLOYEE key. The employee name displays in the
message line.
Sign On by Employee Card
If your system is using employee cards:
Swipe the employee card. The employee name displays in the message line.
Sign On by Fingerprint
You can sign on by fingerprint if your system is using an optional DIGENT IZZEX FD 1000
Fingerprint identification device. (Available with version 2.00s or later.)
1. From the REG screen, enter the employee file number and touch EMPLOYEE key.
The Fingerprints window displays.
2. Touch the employee’s finger to scanner and touch MATCH.
3. The Please Wait message displays while the fingerprint is scanned. If the fingerprint
matches, the sign on is completed; if the fingerprint does not match, an error message
displays.
Sign On by Continue Key
If a CONTINUE key is present on your keyboard, you can sign on the same employee for the
next transaction.
Touch CONTINUE.
Sign Off
1. Enter “0”.
2. Touch EMPLOYEE. The message line displays: SIGN ON REQUIRED.
Or,
Touch QUIT (if a QUIT key is present on your keyboard.)
To Next Page
Loading...
Need help?
General
