28 • Getting Started SAM4s SPS-2000 Operator Manual v1.18
Passwords
The correct password is required to access Report Mode, P-Mode and S-Mode. Also,
manager controlled activities can be completed only after the correct password is entered.
Password Notes
• Default S-Mode and P-Mode Passwords are: 2000; the default Report Mode password is:
0000 (meaning no password entry is required to access this mode); the default manager
password is: 9999. You can set your own 4-digit passwords by selecting Passwords in S
mode.
• Separate passwords for report levels (X and Z1-Z5) can be set in S-Mode System Option
#7. Here the default password is also 0000, meaning all report levels can be accessed
without password entry.
• Authority Level option #40 (found in P-Mode/Employee) allows access to Report Mode,
P-Mode and S-Mode without password entry. Employees (such as managers) linked to
an authority level with this option selected, can conveniently access all modes without
password entry.
• If an employee card system is used, and the MANAGER REQUIRED message displays,
employees with manager status can swipe their card to complete the transaction.
(Available at version 2.00s)
To Next Page
Loading...
Need help?
General
