SAM4s SPS-2000 Operator Manual v1.18 Basic Operations • 41
Registering PLUs/Items
Preset PLUs
Touch a preset PLU to register an item.
Open PLUs
Enter the price and touch an open PLU to register an open-priced PLU.
Code Entry Preset PLUs
Enter the PLU code number and touch the PLU key to register then item.
Code Entry Open PLUs
1. Enter the PLU code number and touch the PLU key. The Amount Required window
displays.
2. Enter the price and touch OK.
PLU Price/HALO Override
PLU override must be allowed. See individual PLU programming and also see P Mode
System Options – General Function Options to set the global override option. Both options
must be set to perform an override.
Enter the override price and touch the PLU to override the preprogrammed price.
PLU Price Change
In REG mode, the sequence: [PRICE CHANGE] [PLU] [PRICE] [PRICE CHANGE]
will change the PLU price. The PLU flag “ALLOW PRICE CHANGE” controls this
function.
Repeat
After an item has been registered, touch the PLU again to repeat the item.
PLU Price Inquiry
Use the PRICE INQ key to check the price of an item without registering it.
1. Touch the PRICE INQ key.
2. Enter the PLU number and touch the PLU key. The item displays with the current
price.
3. Touch the PLU key again if you wish to register the item.