Sam4s SPS-2000 - Employee File Maintenance

138 • Program Maintenance SAM4s SPS-2000 Operator Manual v1.18
3. Select a PLU to edit in one of two ways:
Touch a PLU key located on the keyboard. (If the PLU you wish to edit is not
displayed on the MAIN SCREEN, touch the key that displays the keylink where the
PLU is located, or touch PAGE UP/PAGE DOWN until the appropriate Key Link
where you wish to edit a PLU displays.)
or
Enter the PLU number and touch OK.
4. After a PLU is selected, the PLU PROGRAMMING screen displays at the PAGE #1
tab:
5. Touch the PRICES tab.