Samwontech TEMI770 - STD Command

III : COMMUNICATION
IM TEMI 770E_C 2nd Edition: Sep. 1. 2003. 9/21
3.8 STD Command
This command is register D-register which you want to using at the TEMI 770.
■ Transmission Format
Byte 1 2 3 1 2 1 4 1 4 1 …
S
T
Command
element
X
Addr STD ,
Parameter
number
, D-Reg. No1 , D-Reg. No2 , …
1 4 1 4 2 1 1
CL
, D-Reg. No(n-1) , D-Reg. No(n) SUM
RF
■ Response
Byte 1 2 3 1 2 2 1 1
S C L
T
Command
element
X
Addr STD , OK SUM
RF
- Parameter number : 1 ~ 32
ex) When the registration Temp PV(D0001), Temp SP(D0002), Humi PV(D0005), and Humi SP(D0006)
- Transmission : [stx]01STD,04,0001,0002,0005,0006[cr][lf]
- Transmission(Include Check Sum) : [stx]01STD,04,0001,0002,0005,00069A[cr][lf]