S&C TripSaver II - Recloser Configuration Screens; TCC Settings

54 S&C Instruction Sheet 461-509
To enable a TripSaverII recloser to be an initiator of a gang operation, one or more
of the Initiate Gang Operation toggle buttons must be toggled to the On position.
The three initiator buttons are Permanent Fault, Local Manual Open (LMO), or
Orientation Change. See Figure 49.
Figure 49. Enabling a Gang operation.
Two other features that should be configured are the Local Drop Open Retry Time
and the Local Drop Open Max Retries. See Figure 50.
Figure 50. Configuring the Retry Time and Maximum Number of Retries settings.
Conguring the Communications Gateway