Sanyo PLC-XU301A User Manual

22
RGB(PC digital)
Menu Bar
Fordetailedfunctionsofeachmenu,see“MenuTree”onpages68-69.
Basic Operation
①
②
③
④
⑤
⑥
⑦
⑧
MainMenu Sub-Menu
⑨
⑩
③ Image select
 Forcomputersource,usedtoselectanimagemodefromamongDynamic,Standard,Real,Blackboard(Green),
Colorboardandimage1 - 4(p.33).
ForVideosource,usedtoselectanimagemodeamongDynamic,Standard,Cinema,Blackboard(Green),Colorboard
andImage 1- 4(p.40).
④
Image adjust
 Forcomputersource,usedtoadjustcomputerimage[Contrast,Brightness,Color temp.,White balance (R/G/B),
SharpnessandGamma](pp.34-35).
ForVideosource,usedtoadjustpictureimage[Contrast,Brightness,Color,Tint,Color temp.,White balance (R/G/
B),Sharpness,Gamma,Noise reductionandProgressive](pp.41-42).
② PC adjust
 SelectAuto PC adj.,Fine sync,Total dots,Horizontal,Vertical,Clamp,Display area-HandDisplay area-Vtoadjust
theparameterstomatchwiththePCinputsignalformat(pp.30-32).
⑤
Screen

Forcomputersource,usedtoadjustsizeoftheimage[Normal,True,Wide,Full,CustomandDigital zoom +/–]
(pp.35-36).
ForVideosource,usedtosetsizeofimage[Normal,WideandCustom](p.43).
① Input
 UsedtoselectaninputsourcefromComputer 1,Computer 2,VideoorS-video.
(pp.27-28,37-38).
⑥
 Sound
 Usedtoadjustthevolumeormutethesound(p.24).
⑧ Information
 Displaytheinputsourceinformation:Input,H-sync freq.,V-sync freq.,Screen,Language,Lamp status,Lamp
counter,Power management,Key lock,PIN code lockandRemote control(p.58).
⑩ Guide
 Thekeyoperationisdisplayed.
⑦
Setting
Usedtosettheprojector’soperatingconfigurations(pp.44-57).
⑨ Network
 Seetheowner’smanualof“NetworkSet-upandOperation”.

Sanyo PLC-XU301A Specifications

General

Brand	Sanyo
Model	PLC-XU301A
Category	Projector
Language	English