Sanyo PLC-XU301A User Manual

37
ChooseVideoorS-videobypressingtheINPUTbuttonon
thetopcontrolortheVIDEObuttonortheS-VIDEObutton
ontheremotecontrol.
BeforeusingINPUTbutton,correctinputsource should be
selectedthroughmenuoperationasdescribedbelow.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When video input signal is connected to the
VIDEOjack,selectVideo.
Video
When video input signal is connected to the S-
VIDEOjack,selectS-video.
S-video
Note:
  WhentheInputSearchfunctionissettoOn1orOn2in
theAutosetupfunction,theinputsignalwillbesearched
automatically(p.45).
Top Control
INPUT button
Remote Control
VIDEO button
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint
►
or
theSELECTbutton.
UsethePoint
▲▼buttonstoselecteitherVideoor
S-videoandthenpresstheSELECTbutton.
RGB(PC digital)
S-VIDEO button
Video
S-video
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1 ( RGB)
/(Component) / (Scart)

Sanyo PLC-XU301A Specifications

General

Brand	Sanyo
Model	PLC-XU301A
Category	Projector
Language	English