Satec PM172E User Manual

Chapter 3 Display Operations Data Display
36 Series PM172 Powermeters
Common Measurements (Main Display)
7 kVA/MVA
Ph.L1
kvar/Mvar
Phase L1 powers
(if enabled)
8
Ph.L2
PF
kW/MW
Phase L2 powers
(if enabled)
9 kVA/MVA
Ph.L2
kvar/Mvar
Phase L2 powers
(if enabled)
10 Ph.L3
PF
kW/MW
Phase L3 powers
(if enabled)
11 kVA/MVA
Ph.L3
kvar/Mvar
Phase L3 powers
(if enabled)
12 H01
PF
kW/MW
Fundamental total powers
(if enabled)
13 H1.L1
PF
kW/MW
Fundamental phase L1 powers
(if enabled)
14 H1.L2
PF
kW/MW
Fundamental phase L2 powers
(if enabled)
15 H1.L3
PF
kW/MW
Fundamental phase L3 powers
(if enabled)
16 An.In
AI1
AI2
Analog inputs (optional)
Min/Max and Max. Demands Display
Press the MIN/MAX button. The MIN/MAX LED, or MAX DEMAND LED in
the PM172EH, is illuminated when in the MIN/MAX display. Use the UP and
DOWN arrow buttons to scroll through the Min/Max and Max. Demand
pages.
Note that volts readings are line-to-neutral in 4LN3, 3LN3 and 3BLN3 wiring
modes, and line-to-line in other modes.
Min/Max and Maximum Demands
1
Lo
V1/V12
V2/V23
V3/V31
Minimum volts
2
Lo
I1
I2
I3
Minimum amps
3
Lo
kVA/MVA
PF
kW/MW
Minimum total VA
Minimum total PF (absolute)
Minimum total W
4
Lo
In
Hz
kvar/Mvar
Minimum neutral current
Minimum frequency
Minimum total var
5
Hi
V1/V12
V2/V23
V3/V31
Minimum volts
6
Hi
I1
I2
I3
Maximum amps
7
Hi
kVA/MVA
PF
kW/MW
Maximum total VA
Maximum total PF (absolute)
Maximum total W
8
Hi
In
Hz
kvar/Mvar
Maximum neutral current
Maximum frequency
Maximum total var
S
T
MIN
MAX

Satec PM172E Specifications

General

Brand	Satec
Model	PM172E
Category	Measuring Instruments
Language	English