Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG
Sylk bus FBoxes
Room operating devices
7-8
7
output.
this can be adjusted by the user. The setpoint for the input + the correction by
The values at the inputs are sent to
the PCD7.LR-TR42 when a value is
changed. If no values are changed at
the inputs, but the PCD7.LR-TR42 is to
be reset to these values at the end of
the day, this can be initiated using the
To Next Page
Loading...
Need help?
General
