Function
Focus adjustment ensures that the focus motor is adjusted to focus or
defocus on all types and thicknesses of image.
Technical data
-----
Tools and equipment required
2 mm allen key for lamp cover and back cover mounting screws
2.5 mm allen key for focus motor mounting screws
3 mm allen key (T-handle) for right hand drum cover mounting screws
Focus motor adjustment tool
Photoshop plug-in 2.1.7 or later versions
Extension board (part of the service kit)
5 • ADJUSTMENTS AND TESTING
Focus
Edition 1 • January 1996 Service Manual • ScanMate 4000/5000
5•3a
Caution! ☛ Turn off power • Before connecting or disconnecting cables.
• Before carrying out service operations.
☛ Do not rotate the drum platform while the focus motor adjust-
ment tool is fitted.
☛ When the hardware drawer is partially removed and power turned
on, ensure that the open side of the heat sink on the driver board
is covered, with, for example a piece of cardboard or paper, in
order that cooling is still effective.
To Next Page
Loading...