Function
The SCSI controller is common to the ScanMate 4000 and 5000, (both
0200 and 0210 models) and controls the SCSI communication between
the scanner and host.
Technical data
1 IC chip with 84 pins located on the control board.
Tools and materials required
2 mm allen key for back cover and hardware unit mounting screws
PLCC removal tool for SCSI controller
4 • PART REPLACEMENT
PN 960 20 001 60 (4000/5000) SCSI Controller
Edition 1 • January 1996 Service Manual • ScanMate 4000/5000
4•8a
Caution! ☛ Turn off power • Before connecting or disconnecting cables.
• Before carrying out service operations.
☛ only use the special PLCC removal tool for the SCSI controller. Do
not use other tools, otherwise the chip socket will be damaged.
To Next Page
Loading...