Schedules
Drum cleaning
Tools and material required:
Liquid drum polish and cloth, (ScanView service kit)
Anti-static cloth, (ScanView service kit)
Operation:
Note: the drum must be handled with the utmost care to avoid
scratches.
1 • Using the service program (section 3•5), position the drum in the
park position.
2 • Using the drum polish and cloth supplied in the service kit (or
non-abrasive repro wipes and graphic arts drum cleaner), carefully
6 • CLEANING AND MAINTENANCE
Edition 1 • January 1996 Service Manual • ScanMate 4000/5000
6•3
Frequency Operation Page Reference
As required Drum cleaning 6•3
As required Spindle lubrication 6•4
As required Drum guides lubrication 6•4
As required Clean the hardware unit 6•6
and mechanical parts
Every 6 months Clean the sensor optics 6•7
Cautions !☛ Turn off power • Before connecting or disconnecting cables.
• Before carrying out maintenance operations.
☛ Do not lubricate any bearings in the ScanMate 4000 and 5000.
To Next Page
Loading...