Function
Zero point horizontal sets the zero point at the horizontal position in
order to obtain the correct area on the monitor when selecting a pre-
view or making a scan.
Technical data
-----
Tools and equipment required
2.5 mm allen key for microswitch adjustment screws
3 mm allen key for right hand end plate mounting screw
3 mm allen key (T-handle) for right hand drum cover mounting screws
A piece of transparent tape
Photoshop plug-in 2.1.7 or later versions.
5 • ADJUSTMENTS AND TESTING
Zero Point Horizontal
Edition 1 • January 1996 Service Manual • ScanMate 4000/5000
5•7a
Caution! ☛ Turn off power • Before connecting or disconnecting cables.
• Before carrying out service operations.
To Next Page
Loading...