Operation
Page 4-2 BAJR_USA_EN_V03
4 OPERATION
4.1 Introduction
This chapter describes the basic functions of the coffee machine. Read them carefully
to ensure easy and problem-free routine operation.
Note:
Proper installation and programming of the coffee machine by an authorized service
technician are crucial for a smooth operation and good product quality
Danger!
- During product release, never move cups or other objects positioned below
the beverage outlet, the hot water outlet or the steam pipe! The beverages de-
livered by the machine are hot! After having pressed the selection button, keep
hands and other body parts away from the outlets to prevent scalding!
- Never aim steam or hot water jets against persons!
- Do not touch the hot cup plate or the beverage outlets. Touch the hot water
outlet and the steam pipe only at the insulated handles.
- The coffee machine does not stop when a cup is removed during delivery from
underneath an outlet. Delivery (including pre-selected delivery) can only be
terminated by pressing the [STOP] button.
- The coffee machine does not stop when a cup is removed during delivery from
underneath an outlet. Delivery (including pre-selected delivery) can only be
terminated by pressing the [STOP] button.
Noise emissions!
Noise emission levels can be up to 70 dB (A), particularly when heating up beverages.
4.2 Operating modes
There are 2 operating modes, shown on the display as follows:
The control board is switched off. The coffee machine is, however, still con-
nected to the power supply.
Your coffee machine is ready for operation. When a product button is pressed,
the selected beverage is delivered.
Note:
When switched on again, the machine will need a short time to reach the pro-
grammed operating temperature.
To Next Page
Loading...
Need help?
General
