Operation
Page 4-28 BAJR_USA_EN_V03
6. Press the [ M ] button to confirm the setting or modification.
7. * Select next menu: Press the [ M ] button.
8. * Return to normal operating mode: Press the [ M ] button, until "Ready" ap-
pears in the display.
4.6.6.6 PIN-Code for programming stage "general settings" ON / OFF
The PIN code for system programming and changing the general settings (see
4.6.1 "Menu overview" page4-16) can be protected against unauthorized
access. This is done by using the override PIN code: see 4.6.6.8 "Change PIN
code" page 4-29.
The coffee machine is set to run in "Ready" mode and use the default settings
for routine operation.
Note:
Programming can be cancelled at any time by pressing the [ on/off ] button. All
settings that have been confirmed so far by pressing the [ M ] button are still va-
lid. The current value shown in the display is discarded and the original setting is
kept.
1. Press the [ M ] button.
2. Press the [ DECAF ] button:
Display example (=factory setting)
3. Enter the PIN code as described in section 4.6.6.1 "Entering PIN code" on page
4-24.
4. Press the [ M ] button until the following menu appears:
Display example (=factory setting)
5. Either press button [
] or [
] to switch off or switch on the PIN code.
Adjustment range:
- ON / OFF
6. Press the [ M ] button to confirm the setting or modification.
7. * Select next menu: Press the [ M ] button.
8. * Return to normal operating mode: Press the [ M ] button, until "Ready" ap-
pears in the display.
To Next Page
Loading...
Need help?
General
